Wholesale Dealers Of Epdm Flashings - EPDM Roofing Accessory Epdm Seam Tape Termination Bar – Wenrun
Wholesale Dealers Of Epdm Flashings - EPDM Roofing Accessory Epdm Seam Tape Termination Bar – Wenrun Detail:
WENRUN offers a complete line of high-quality accessories for the installation of your EPDM roof.
Here is the one-stop platform of your EPDM roofing system. Please feel free to contact us for custom information if you need other items.
Main accessories for roofing system
| Seam tape | Used to create a seam one membrane to another | 8cm*40m/roll 15cm*40m/roll Custom sizes |
| Cover tape | Used to flash in metal drip edge and other single plane flashing | 15cm*40m/roll Custom sizes |
| Patch tape | Used to repair damage (such as cuts, nicks, gouges, and holes) | Custom sizes |
| Flashing | Used for flashing details, T-patches and filed seams incorporating angle changes | 30cm*30m/roll Custom sizes |
| Termination Bar | Strong aluminum metal strips that are designed to support a roofing membrane system at it’s termination point on a vertical surface. | 2m/pcs 3m/pcs Silver /Black color Custom colors |
| Screws and Plates | Used for the secure installation of any approved insulation board or the installation of the Reinforced Strip. Screws can also be used for Termination Bar installation | 35mm, 50mm, 65mm, 75mm, 90mm, 105mm, 125mm,135mm 150mm, 175mm,200mm, 225mm |
EPDM Prefabricated Parts
EPDM Drainage: allows the spigot to enter and fit any kind of drain-pipe with its particular shape, eliminating at the same time any possibities of infiltration between the spigot and the drain pipe.
EPDM Scupper drains: provide a means for water to flow off roofs surrounded by parapet walls. They can be installed in two positions: either with the outlet pipe passing through the parapet wall or with the outlet pipe passing through the roof deck.
EPDM inside corners: used where inside corners are permanently exposed, or where additional flashing must be applied above.
EPDM outside corners: used to seal the outside corner formed when two walls project into a roof.
EPDM pipe boot: offer a simple and reliable means to seal small pipes such as sewer vents and electrical service entry conduit.
Product detail pictures:
Related Product Guide:
Our company since its inception, always regards product quality as enterprise life, continuously improve production technology, improve product quality and continuously strengthen enterprise total quality management, in strict accordance with the national standard ISO 9001:2000 for Wholesale Dealers Of Epdm Flashings - EPDM Roofing Accessory Epdm Seam Tape Termination Bar – Wenrun , The product will supply to all over the world, such as: Russia, Marseille, Belize, You can let us know your idea to develop unique design for your own model to prevent too much similar parts in the market! We will provide our best service to satisfy all your needs! You should contact us right away!
By Georgia from Oslo - 2018.02.08 16:45
This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
By Freda from Hamburg - 2018.05.15 10:52
