Manufacturer For 45 Mil Epdm - EPDM Roofing Accessory Epdm Seam Tape Termination Bar – Wenrun
Manufacturer For 45 Mil Epdm - EPDM Roofing Accessory Epdm Seam Tape Termination Bar – Wenrun Detail:
WENRUN offers a complete line of high-quality accessories for the installation of your EPDM roof.
Here is the one-stop platform of your EPDM roofing system. Please feel free to contact us for custom information if you need other items.
Main accessories for roofing system
Seam tape | Used to create a seam one membrane to another | 8cm*40m/roll 15cm*40m/roll Custom sizes |
Cover tape | Used to flash in metal drip edge and other single plane flashing | 15cm*40m/roll Custom sizes |
Patch tape | Used to repair damage (such as cuts, nicks, gouges, and holes) | Custom sizes |
Flashing | Used for flashing details, T-patches and filed seams incorporating angle changes | 30cm*30m/roll Custom sizes |
Termination Bar | Strong aluminum metal strips that are designed to support a roofing membrane system at it’s termination point on a vertical surface. | 2m/pcs 3m/pcs Silver /Black color Custom colors |
Screws and Plates | Used for the secure installation of any approved insulation board or the installation of the Reinforced Strip. Screws can also be used for Termination Bar installation | 35mm, 50mm, 65mm, 75mm, 90mm, 105mm, 125mm,135mm 150mm, 175mm,200mm, 225mm |
EPDM Prefabricated Parts
EPDM Drainage: allows the spigot to enter and fit any kind of drain-pipe with its particular shape, eliminating at the same time any possibities of infiltration between the spigot and the drain pipe.
EPDM Scupper drains: provide a means for water to flow off roofs surrounded by parapet walls. They can be installed in two positions: either with the outlet pipe passing through the parapet wall or with the outlet pipe passing through the roof deck.
EPDM inside corners: used where inside corners are permanently exposed, or where additional flashing must be applied above.
EPDM outside corners: used to seal the outside corner formed when two walls project into a roof.
EPDM pipe boot: offer a simple and reliable means to seal small pipes such as sewer vents and electrical service entry conduit.
Product detail pictures:
Related Product Guide:
With advanced technologies and facilities, strict good quality manage, reasonable rate, superior assistance and close co-operation with shoppers, we have been devoted to supplying the very best price for our consumers for Manufacturer For 45 Mil Epdm - EPDM Roofing Accessory Epdm Seam Tape Termination Bar – Wenrun , The product will supply to all over the world, such as: UK, Finland, Paris, Our company, is always regarding quality as company' s foundation, seeking for development via high degree of credibility , abiding by iso9000 quality management standard strictly , creating top-ranking company by spirit of progress-marking honesty and optimism.
By Patricia from Leicester - 2018.12.25 12:43
A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
By Astrid from Luxemburg - 2017.11.11 11:41