Europe Style For Epdm Liquid Rubber Roofing For Rv - EPDM Roofing Accessory Epdm Seam Tape Termination Bar – Wenrun
Europe Style For Epdm Liquid Rubber Roofing For Rv - EPDM Roofing Accessory Epdm Seam Tape Termination Bar – Wenrun Detail:
WENRUN offers a complete line of high-quality accessories for the installation of your EPDM roof.
Here is the one-stop platform of your EPDM roofing system. Please feel free to contact us for custom information if you need other items.
Main accessories for roofing system
Seam tape | Used to create a seam one membrane to another | 8cm*40m/roll 15cm*40m/roll Custom sizes |
Cover tape | Used to flash in metal drip edge and other single plane flashing | 15cm*40m/roll Custom sizes |
Patch tape | Used to repair damage (such as cuts, nicks, gouges, and holes) | Custom sizes |
Flashing | Used for flashing details, T-patches and filed seams incorporating angle changes | 30cm*30m/roll Custom sizes |
Termination Bar | Strong aluminum metal strips that are designed to support a roofing membrane system at it’s termination point on a vertical surface. | 2m/pcs 3m/pcs Silver /Black color Custom colors |
Screws and Plates | Used for the secure installation of any approved insulation board or the installation of the Reinforced Strip. Screws can also be used for Termination Bar installation | 35mm, 50mm, 65mm, 75mm, 90mm, 105mm, 125mm,135mm 150mm, 175mm,200mm, 225mm |
EPDM Prefabricated Parts
EPDM Drainage: allows the spigot to enter and fit any kind of drain-pipe with its particular shape, eliminating at the same time any possibities of infiltration between the spigot and the drain pipe.
EPDM Scupper drains: provide a means for water to flow off roofs surrounded by parapet walls. They can be installed in two positions: either with the outlet pipe passing through the parapet wall or with the outlet pipe passing through the roof deck.
EPDM inside corners: used where inside corners are permanently exposed, or where additional flashing must be applied above.
EPDM outside corners: used to seal the outside corner formed when two walls project into a roof.
EPDM pipe boot: offer a simple and reliable means to seal small pipes such as sewer vents and electrical service entry conduit.
Product detail pictures:
Related Product Guide:
We thinks what customers think, the urgency of urgency to act in the interests of a customer position of principle, allowing for better quality, lower processing costs, prices are more reasonable, won the new and old customers the support and affirmation for Europe Style For Epdm Liquid Rubber Roofing For Rv - EPDM Roofing Accessory Epdm Seam Tape Termination Bar – Wenrun , The product will supply to all over the world, such as: Slovakia, Canada, San Francisco, we have all day online sales to make sure the pre-sale and after-sale service in time. With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we are trying our best to be your good partner.
By Elsa from Thailand - 2017.07.28 15:46
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately, we successfully completed the procurement tasks.
By Maud from Austria - 2017.12.31 14:53