EPDM Roofing Accessory Epdm Seam Tape Termination Bar
WENRUN offers a complete line of high-quality accessories for the installation of your EPDM roof.
Here is the one-stop platform of your EPDM roofing system. Please feel free to contact us for custom information if you need other items.
Main accessories for roofing system
|Seam tape||Used to create a seam one membrane to another||8cm*40m/roll
|Cover tape||Used to flash in metal drip edge and other single plane flashing||15cm*40m/roll
|Patch tape||Used to repair damage (such as cuts, nicks, gouges, and holes)||Custom sizes|
|Flashing||Used for flashing details, T-patches and filed seams incorporating angle changes||30cm*30m/roll
|Termination Bar||Strong aluminum metal strips that are designed to support a roofing membrane system at it’s termination point on a vertical surface.||2m/pcs
Silver /Black color
|Screws and Plates||Used for the secure installation of any approved insulation board or the installation of the Reinforced Strip. Screws can also be used for Termination Bar installation||35mm, 50mm, 65mm, 75mm,
90mm, 105mm, 125mm,135mm
EPDM Prefabricated Parts
EPDM Drainage: allows the spigot to enter and fit any kind of drain-pipe with its particular shape, eliminating at the same time any possibities of infiltration between the spigot and the drain pipe.
EPDM Scupper drains: provide a means for water to flow off roofs surrounded by parapet walls. They can be installed in two positions: either with the outlet pipe passing through the parapet wall or with the outlet pipe passing through the roof deck.
EPDM inside corners: used where inside corners are permanently exposed, or where additional flashing must be applied above.
EPDM outside corners: used to seal the outside corner formed when two walls project into a roof.
EPDM pipe boot: offer a simple and reliable means to seal small pipes such as sewer vents and electrical service entry conduit.